The effects of shrinkage on long-term slab deflections
- Professor Raymond Ian Gilbert, The University of New South Wales, Australia
|
Review of Australian Support-Settlement Tests on Continuous One-Way Reinforced-Concrete Slabs Incorporating Low-Ductility Reinforcement
- Mr Scott Munter, SRIA, Australia
- EProf Vijaya Rangan, CUT, Australia
|
A Review of Recent Australian Bond Test Results and the New Stress Development Design Rules of AS 3600–2009
- Mr Scott Munter, SRIA, Australia
- Dr Mark Patrick, MP Engineers, Australia
- EProf Vijaya Rangan, CUT, Australia
|
Design and Construction of Unbonded Post-tensioned Concrete Slab and Beam in USA
- Dr Muang Seniwongse, Design Construction Consultants Corporation, United States
|
|
Experimental study on residual punching shear capacity of RC slabs damaged by repeated impact loads
|
Investigation on the Viability of Using Fly Mesh as External Confinement for High Strength Concrete Columns
- Hua Zhao, University of Wollongong, Australia
|
Sustainable Concrete Buildings
- Mr Harry Backes, Cement Concrete & Aggregates Australia
|
AS 2159-2009: Piling - Design and installation Effects of Revisions on Design and Cost
- Peter V Andrews, SEMF Pty. Ltd.
|
New Design Tables for 500 MPa Reinforcement Development and Lap Splice Lengths in Accordance with AS 3600–2009
- Mr Scott Munter, SRIA, Australia
- Dr Mark Patrick, MP Engineers, Australia
|